Harris Micro-Punch® Plastic HMP Specifications
Specifications for Standard Plastic Harris Micro-Punch®
Plastic barrel injection moulded from high tech, plastic to eliminate sticking.
HMP Tips from S.S 404 rod, single edge sharpened, heat treatment with Rockwell Hardness Rc58 (HT58Rc).
HMP Plunger: hybrid ABS/PC with SS404 ejection rod.
HMP Plunger 2.80mm: SS404 SS.
Dot
Size
in mm |
Size
mm.
+/- 0.06 |
Cat. No. |
HMP |
Tip for Plastic Harris Micro-Punch® |
Length
mm/in. |
I.D. mm/in.
+/- 0.060
/0.0024 |
Shaft O.D. mm/in.
|
Tip
Length
mm/in. |
Shaft
Length
mm/in. |
Shaft
Wall
mm/in. |
Edge
wall
mm/in. |
Lumen
Length
mm/in. |
Lumen
(Void) Vol.
ml/c.i. |
Edge
Angle |
 |
0.50
|
HMPS-1-0.50D |
142.04
/5.93 |
0.500/
0.020 |
3.20/
0.128 |
16.8/
0.672 |
5.50/
0.22 |
1.30/
0.052 |
0.0010/
.00004 |
5.400/
0.216 |
1.060/
0.00007 |
15° |
 |
1.00
|
HMPS-1-1.00D |
142.04
/5.93 |
1.000/
0.040 |
3.20/
0.128 |
16.8/
0.672 |
5.50/
0.22 |
1.10/
0.044 |
0.0010/.
00004 |
6.680/
0.267 |
5.243/
0.00034 |
19° |
 |
1.20
|
HMPS-1-1.20D |
142.04
/5.93 |
1.200/
0.048 |
3.20/
0.128 |
16.8/
0.672 |
5.50/
0.22 |
1.05/
0.042 |
0.0010/
.00004 |
5.740/
0.230 |
6.488/
0.00042 |
23° |
 |
2.00
|
HMPS-1-2.00D |
142.04
/5.93 |
2.000/
0.080 |
3.20/
0.128 |
16.8/
0.672 |
5.50/
0.22 |
0.65/
0.026 |
0.0010/.
00004 |
5.880/
0.235 |
1846/
0.00118 |
14° |
 |
3.00
|
HMPS-1-3.00D |
142.04
/5.93 |
3.000/
0.120 |
3.20/
0.128 |
16.8/
0.672 |
5.50/
0.22 |
0.62/
0.024 |
0.0010/.
00004 |
7.090/
0.284 |
50.09/
0.00321 |
11° |
|
